Mounting Angles

Cross Members

The Sequel Model 485 Cross Member may be used in many ways, with one way shown to the right. By using a combination of horizontal and vertical Cross Members and a single longer Spine with a Hook and Twist (SP3), a “Box Rack” type of setup can be made for holding clips.

Aluminum Titanium

485 Cross Member

Material: 6063 AL

The Sequel Model 177 Titanium Horizontal Mounting Bar is used in a way similar to the Model 176 Mounting Angle. By attaching a Sequel Rack to the Titanium Horizontal Mounting Bar and bolting it to a pair of Sequel Model 586 Titanium Spines a “Box Rack Assembly” can be made.

177 Horizontal Mounting Bar

Material: C.P. Titanium

Mounting Angles

Aluminum Titanium

176 Mounting Angle for Racks

Material: 6063 AL
For Rack Lgths: 12″, 18″, 24″,
30″, 36″, 48″

176C Mounting Angle for Clips

Material: 6063 AL
Lengths: 24″, 30″, 36″, 48″

The Sequel Model 176 Mounting Angle is used to attach Rack sections to Spines creating a Box Rack Assembly. Simply bolt the Rack (order RK3 Hole Style) to the appropriate length Mounting Angle. Use 1″ bolts to attach each end of the angle to a slotted spine. The slots allow each Mounting Angle and Rack assembly to be adjusted up or down to accommodate the part.


The Sequel Aluminum Contact Bar (sometimes called an H-Rail) is designed to be snapped over a rigid frame titanium box rack rail.
The actual length will be 3/8″ undersize to allow for horizontal adjustment.

Aluminum Contact Bar (H-Rail)

Material: 6063 AL
Std Lengths: 12″, 15″, 18″, 23″,
24″, 30″, 38″, 48″

Get a Free Quote for Any Racking Need