Clip Holes
Sequel Clips are available in a wide variety of styles, shown in the title bar above. Sequel Clips are available with different styles of mounting holes (shown below) to fit the fastener you require.
NOTE: All Holes Styles are not available on every clip.
Clip Hole Styles
CL1
One hole for 3/16″ rivet, .50″ center-to-center
CL2
Two holes for 3/16″ rivets, .50″ center-to-center
CL3
One hole for 1/4-20 bolt
CL4
Two holes for 1/4-20 bolts, 1″ center-to-center, .50″ from end
CL5
One hole for 5/16-18 bolt
CL6
Two holes for 5/16-18 bolts, 1″ center-to-center, .50″ from end
CL8
One hole for 3/8″ bolts, centered
CL10
One hole for 1/4-20 bolt, .875″ from end
CL11
One hole for 5/16-18 bolt, .875″ from end
CL12
Two holes for 1/4-20 bolts, 1″ center-to-center
30 Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30A Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30B Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30C Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30R Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
121 Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
121XL Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
159A Clip
Notched (.125″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30AM Clip
Notched (.25″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30BM Clip
Notched (.25″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30CM Clip
Notched (.25″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30M Clip
Notched (.25″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30RM Clip
Notched (.25″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
159B Clip
Notched (.312″ notches)
Hole Style: CL2, CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
30CMW Clip
Notched (.50″ notches)
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
123BCN Clip
Channel Notched (.18″ dia. channel notches) Fits into 1″ minimum dia. hole
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
123BCNN Clip
Channel Notched (.18″ dia. channel notches) Fits into 3/4″ minimum dia. hole
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI
123BCNW Clip
Channel Notched (.18″ dia. channel notches) Fits into 1-1/4″ minimum dia. hole
Hole Style: CL3, CL5
Material: .063″ or .080″ AL, .050″ TI